mold inspection in Holon.
Holon is a city of housing blocks: 1960s and 70s buildings on pillars, with thin concrete walls, windows replaced one at a time over the years and balconies closed in. On the lower floors moisture rises from the car park and the open ground floor; on the top floors the flat roof seeps in winter. Much of the mold we find here is behind wardrobes in north-facing bedrooms and in bathrooms without a window.
About 40 minutes from our Ra'anana lab
- Air sampling
- Moisture mapping
- Thermal imaging
- Surface samples
- HVAC and ventilation
- Structure and walls
why mold grows in Holon.
- Blocks on pillars: a cold floor over open ground, condensation in first-floor flats
- Internal bathrooms with no window and a weak or missing extractor
- Old flat roofs with worn sealing, leaks into top-floor apartments
from the call to the report.
A short call
Tell us what you saw, what you smell and what you already tried. We set a time that suits you in Holon.
The visit
A room by room walk with a moisture meter, a thermal camera and an air sampling pump. One to two hours in most homes.
The lab
Samples go to an accredited lab. Species identification and concentrations usually take one to two weeks.
A clear report
A digital report with a risk score per room, what was found, and what to fix first. We answer every question after it lands.
before you book in Holon.
In a Holon housing block the first-floor flat above the pillars is cold and damp. Can that be fixed?
A floor over an open ground level cools from below, and in winter its corners reach the dew point. An inspection measures exactly where, and often insulating the underside of that floor from outside is enough, a fix the building committee can do once for the whole building.
The bathroom in a Holon flat has no window and an old fan. Which comes first, a fan or a test?
If the mold is only on the ceiling and in the silicone, replace the fan first and watch. If it is also on the outside of the bathroom wall, in the hallway or the next room, there is moisture from the plumbing or the sealing, and a fan will not help. A short inspection tells the cases apart before money is spent.
How much does a mold inspection in Holon cost?
The price follows the size of the property and the number of samples needed, not the city. After a short call you get a written, no obligation quote listing what is included. There is no travel surcharge for Holon.
How soon can you inspect in Holon?
Usually within a few days, and for urgent cases like a flood or a fresh leak we try to come sooner. Our team leaves from Ra'anana and visits Holon regularly.
Do you also remove the mold?
No. We inspect, measure and report, and we do not do remediation. That keeps the report objective, and the contractor works from findings rather than an estimate. We are happy to recommend professionals around Holon.
Worth reading.
mold testing for when it happens to you.
not in Holon?
We cover the whole centre of the country, Jerusalem and the north. These are the cities with a page of their own.
Cookies on this site
We store only what the site needs to work: keeping you signed in, remembering your language, and checking you're not a bot. We also run Google's advertising tag on every page, to tell which ads bring people here. Until you allow it, that tag stores nothing on your device and sends Google only a basic, cookie-free signal. Allowing all lets it use cookies too. Cookie Policy · Privacy Policy